In this IRL Pro guide
1. IRL Pro as an Android streaming app
IRL Pro is a mobile streaming app for Android. The official product page lists Twitch, Kick, YouTube, and other RTMP or SRT targets. It also lists SRTLA bonding, bitrate adjustment during the stream, automatic bitrate control, chat and web overlays, and battery and status displays.
Features can change. So also check the official IRL Pro website.
2. Prepare Android and accessories
- Install IRL Pro from the officially linked Google Play listing.
- Update Android and the app, and keep enough storage free.
- Check battery optimization so Android does not kill the stream.
- Test the microphone, windscreen, mount, cables, and power bank one by one.
- Silence notifications, and change settings only when you are safely standing still.
3. Set up RTMP, SRT, or SRTLA
Server address, port, stream ID, passphrase, and stream key must match the receiver exactly. RTMP or RTMPS suits common platform targets, SRT suits reliable transport to a relay, and SRTLA suits several network paths to a compatible bonding receiver.
| Route | Use | Keep in mind |
|---|---|---|
| RTMP/RTMPS | direct platform target | use RTMPS when supported |
| SRT | one connection to a relay or receiver | match latency, mode, and stream ID |
| SRTLA | bond several connections | use a compatible receiver |
Pick the route your receiver actually accepts. Straight to the platform, that is usually RTMP/RTMPS. For SRTLA bonding you need a matching receiver.
4. Resolution, FPS, and adaptive bitrate
A conservative starting point is 720p30 to 1080p30 at roughly 2,500 to 4,500 kbps. The receiver, codec, motion, and the upload you can count on decide the actual values.
| Setting | Starting point | Note |
|---|---|---|
| Resolution and FPS | 720p30 to 1080p30 | depends on motion and the receiver |
| Bitrate | roughly 2,500 to 4,500 kbps | based on the upload you can rely on at all times |
| Codec | H.264 | works almost everywhere |
| Upload headroom | at least 20 percent | never max out the line |
- Start with H.264 for broad compatibility.
- Leave at least 20 percent upload headroom.
- Test automatic bitrate control in a private stream.
- If you see picture errors, reduce bitrate and FPS first.
- Watch temperature and battery level during long tests.
5. SRTLA over several connections
The official page lists SRTLA bonding over several connections. Depending on the device and accessories, you can combine cellular, Wi-Fi, and USB Ethernet.
- Test each path on its own.
- Use different cellular networks where possible.
- Turn on all paths together and watch the status values.
- Cut one path on purpose and check the recovery.
- Repeat the test while walking and across cell handovers.
Bonding does not replace network coverage. Several connections in the same overloaded network can share the same weak spot.
Practice video: phone bonding with IRL Pro and SRTLA
The video by Akinos01 “Akinos” shows the basic setup of a mobile bonding workflow with an Android smartphone, IRL Pro, and SRTLA. It adds a practical look to the current written guide.
Written alternative to the video: set up the stream target, prepare SRTLA bonding, and run the outdoor test, all without loading YouTube.
6. Camera, microphone, and power
- Check the cameras and focal lengths before the stream.
- Test stabilization together with resolution and frame rate.
- Check the external microphone with a windscreen and a test recording.
- Check Bluetooth for delay and doubled playback.
- Size the power bank, cables, and charging power for sustained load.
- Avoid direct sun and blocked airflow.
7. Chat, dashboards, and web overlays
The official feature overview lists chat overlays for Twitch and Kick, web overlays with audio, and dashboards for alert services. Add these features only once the camera, audio, and transport run stably.
- Treat personal overlay URLs like credentials.
- Use chat with moderation and an easy-to-reach off switch.
- Play alert audio exactly once and avoid a doubled sound through OBS.
- Do not overload the mobile interface with elements.
8. Privacy, keys, and location
The official IRL Pro privacy policy mentions error reports, network, battery, and phone status, and streaming statistics. It also names Google Play Services and New Relic as third-party providers.
- Never publish stream keys, passphrases, or overlay URLs.
- Grant only the Android permissions you need.
- Do not show private notifications on screen.
- Turn on location data only once you are away from your home or lodging.
9. Full outdoor test
- Start stationary with one connection and a low bitrate.
- Record picture and audio at the relay or in OBS.
- Turn on all the network paths you plan to use.
- Run for at least 30 minutes under realistic conditions.
- Cut one network path on purpose.
- Test alerts, chat, audio, and the BRB scene one by one.
- Document temperature, battery, data usage, and picture errors.
10. Common questions about IRL Pro
Which devices does IRL Pro run on?
IRL Pro is offered through Google Play for Android. Compatibility, camera, microphone, encoder performance, and heat need to be checked with the smartphone you use.
Which protocols does IRL Pro support?
The official product page lists RTMP and SRT as well as SRTLA bonding over several connections. The complete signal path has to match the receiver you use.
Do I need a relay server?
Not necessarily for a direct platform target. For an OBS production, controlled outage scenes, and SRTLA, you need a compatible relay or bonding receiver.
What is the difference between SRT and SRTLA?
SRT runs over a single connection to a relay or receiver. SRTLA bonds several connections, and for that you need a receiver that can do bonding. More on the SRT and SRTLA & bonding pages.
Which privacy points matter?
The official privacy policy mentions error reports, network, battery, and phone status, and streaming statistics, among other things. The rules of connected platforms and targets apply as well.
Official information
The official website, the Play Store listing, and the current privacy policy are what count.